GSA Auctions Construction Equipment Update

CURRENT BID: 55.0 STATE: GA NO. OF BIDDERS: 2 CLOSE TIME: Tue, 19 May 2026 17:49:00 CST

Overview

(1) Cotterman 5-Step Ladder. The ladder is classified in new condition. The ladder appears to be in new condition with all components present.

Specifications

• Make: Cotterman
• Overall Height: 80 inches
• Width: 32 inches
• Depth: 60 inches
• Weight Capacity: 450 lbs
• Material: Steel or aluminum

Key Features

• Slip-resistant steps for enhanced safety.
• Handrails for additional support.
• Locking casters for mobility and stability.
• OSHA/ANSI compliant design.

Condition & Markings

• This lot is in new condition. Parts may be missing, and repairs may be required.
• The ladder shows no visible signs of wear or damage.
• All components including steps, handrails, and casters appear intact.

Inspection and Removal

• Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
• Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
• Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
• Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.

Disclaimer

• The condition of the property is not warranted. Pictures are not warranted.

]]>

CURRENT BID: 1050.0 STATE: NC NO. OF BIDDERS: 2 CLOSE TIME: Tue, 19 May 2026 15:06:00 CST

Overview

 International M10A scoop loader. The loader does not run and has motor issues and transmission issues with missing parts, having been parked for 6 years.

Specifications

• Make: International
• Model: M10A
• Serial Number: 333-6010001481

Key Features

• Includes original forks as pictured.
• The attached bucket was fabricated at the site.

Condition & Markings

• Parts are missing, and repairs are required.
• The loader does not run due to motor and transmission issues.
• The equipment has been parked for 6 years.
• Bears USDA tag 0912.

Inspection and Removal

• Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
• Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
• Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
• Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
• Buyer has 10 days to remove the property and will need to bring equipment to load this property.
• Contact Brian Stephenson with questions at 919-796-3962, Central Crops Research Station, 13223 Clayton Boulevard, Clayton NC 27520.

Disclaimer

• The condition of the property is not warranted. Pictures are not warranted.

]]>

CURRENT BID: 605.0 STATE: NC NO. OF BIDDERS: 2 CLOSE TIME: Tue, 19 May 2026 15:03:00 CST

Overview

Dresser 520B scoop loader. The equipment is classified in repairable condition. The loader has been parked for 6 years and has motor, transmission and hydraulic issues that prevent it from running.

Specifications

• Make: Dresser
• Model: 520B
• Serial Number: 35268

Condition & Markings

• Parts may be missing, and repairs may be required.
• The loader has been parked for 6 years and will not run due to motor, transmission and hydraulic issues.
• Equipment displays USDA tag 0916 and CSREES identification 2537-00.
• Item was acquired on 8/15/2000.

Inspection and Removal

• Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
• Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
• Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
• Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
• Please inspect before purchase as no technician is available to provide further details on defects.
• Buyer has 10 days to remove the property and will need to bring equipment to load this property.
• Contact Brian Stephenson at 919-796-3962 with questions. Property is located at Central Crops Research Station, 13223 Clayton Boulevard, Clayton NC 27520.

Disclaimer

• The condition of the property is not warranted. Pictures are not warranted.

]]>

CURRENT BID: $250.0 STATE: WI NO. OF BIDDERS: 0 CLOSE TIME: Tue, 19 May 2026 14:15:00 CST

Overview

(2) Backflow valves. The items are classified in new condition. The lot includes one 6-inch RPZ backflow valve and one 3-inch RPA backflow valve as shown in the available documentation.

Key Features

• Includes one 6-inch Reduced Pressure Zone (RPZ) backflow valve.
• Includes one 3-inch Reduced Pressure Assembly (RPA) backflow valve.
• Valves are designed for backflow prevention applications.

Condition & Markings

• This lot is in new condition. Parts may be missing, and repairs may be required.
• Items appear unused based on available information.

Inspection and Removal

• Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
• Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
• Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
• Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.

Disclaimer

• The condition of the property is not warranted. Pictures are not warranted.

]]>

CURRENT BID: $50.0 STATE: AZ NO. OF BIDDERS: 0 CLOSE TIME: Tue, 19 May 2026 13:13:00 CST

This lot contains (2 EA) Bobcat tailgate style salt and sand spreaders. Both units exhibit heavy rust and outdoor storage wear with untested electrical components.

Specifications

• Make: Bobcat
• Model: 7101267

Key Features

• Tailgate mounting style designed for vehicle attachment.
• Hoppers remain intact on both units.
• Electrical wiring harnesses are present on both spreaders.

Condition & Markings

• This lot is in used condition. Parts may be missing, and repairs may be required.
• Both units show heavy rust throughout the metal framework and components.
• Electrical components are untested and may require repair or replacement.
• Evidence of prolonged outdoor storage exposure is visible on both spreaders.
• Surface corrosion is present on metal surfaces and mounting brackets.
• Warning labels and manufacturer identification plates are visible on the units.

Inspection and Removal

• Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
• Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
• Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
• Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
• Pickups are available Monday through Friday 8-3pm by appointment only.

Disclaimer

• The condition of the property is not warranted. Pictures are not warranted.
• Sold as is. ICN 368170-6090-JJ71

]]>