.
04/10/2026 06:02 PM EDT
CURRENT BID: $10000.0 STATE: MT NO. OF BIDDERS: 0 CLOSE TIME: Fri, 17 Apr 2026 16:02:00 CST
Overview
This lot contains (1) 1992 or 1993 John Deere 690E LC Excavator. The excavator is classified in repairable condition. The serial plate is missing but the unit is stamped as 548704. The center pivot bearing requires repair.
Specifications
- Make: John Deere
- Model: 690E LC
- Model Year: 1992 or 1993
- Hours: 2293
- Engine Model: John Deere 6068T
- Engine Serial Number: T0608T477914
- No of Cylinders: 6
- Fuel Type: Turbocharged diesel
- Displacement: 414 cu in (6.8 L)
- Gross Power: 140 hp (104 kW)
- Net Power: 130 hp (97 kW)
- Max Torque: 424 lb-ft (575 Nm)
- Operating Voltage: 24 V
- Alternator: 42 amps
- Operating Weight: 43,890 lbs (19,908 kg)
- Shipping Length: 39 ft (11.9 m)
- Shipping Height: 11 ft (3.3 m)
- Width: 10 ft (3 m)
- Height to Top of Cab: 9 ft (2.8 m)
- Tail Swing Radius: 9 ft (2.7 m)
- Ground Clearance: 1.5-2 ft (0.45-0.6 m)
- Max Digging Depth: 37 ft (11.3 m)
- Max Reach Along Ground: 50 ft (15.2 m)
- Max Loading Height: 39 ft (11.8 m)
- Max Cutting Height: 44-45 ft (13.6 m)
- Swing Speed: 13 rpm
- Max Travel Speed: 3.8-4 mph (6 km/h)
- Drawbar Pull: 40,300 lbs (18,280 kg)
- Ground Pressure: 5.6 psi
- Relief Valve Pressure: 5,000 psi
- Pump Flow Capacity: 100 gal/min (379 L/min)
- Hydraulic Fluid Capacity: 84 gal (318 L)
- Fuel Tank: 85 gal (322 L)
- Cooling System: 44 gal (167 L)
- Engine Oil: 20 gal (76 L)
- Swing Drive Fluid: 4 gal (15 L)
Condition & Markings
- This lot is in repairable condition. Parts may be missing, and repairs may be required.
- The serial plate is missing from the excavator.
- The center pivot bearing requires repair.
- The unit can be loaded on a transport.
Inspection and Removal
- Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
- Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
- Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
- Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
Disclaimer
- The condition of the property is not warranted. Pictures are not warranted.
Item Control Number :140326-6055-0001
]]>